BELsorp - HP
Copyright ® 2007 Particle Test Pty Ltd
High pressure adsorption measurement
The importance of high pressure adsorption measurement is growing in various industries,
hydrogen or methane storage, pressure swing adsorption (PSA), CO2 absorption into
hypolymer etc. But the instruments for measuring high pressure gas sorption are large-size,
expensive and hard to use. The BELSORP-HP is a small foot print bench-top type instrument.
Also low price and easy to operate. Over years of our experience in adsorption science
results in its technology.
The BELSORP-HP would provide the useful information with
the researchers in both research and industrial fields.
High pressure adsorption measurement up to 13.5MPa
Compact bench-top type
Easy to use
A variety of measurement/pretreatment temperature control systems from 77K to 400°C
User friendly analysis software - BELSimTM
Rate of adsorption analysis software (option) - BELDynaTM
JIS H7201 compliant
Measuring principle Volumetric adsorption method
Adsorptive N2, Ar, O2, CO, H2, CO2, CH4 and other non-corrosive gas
Analysis/pretreatment port 1 port
Pressure transducer Range :Select one among F.S. 1,1.5,2,3.5,13.5MPa
(133kPa for
low pressure measurement can be added)
Accurancy : 0.08%F.S.
Measurement pressure
range 85% of pressure transducer F.S.
Temperature range -10 ~ 400 °C
Measurement software Adsorption / desorption isotherm measurement and adsorption kinetic.
Analysis software
(BELMasterTM) Adsorption / desorption isotherm
BET method
Langmuir
method
Horvath-Kawazoe method
Saito-Foly method
Micropore volume by DA method
Isosteric
heat of adsorption (Clausius-Clapeyron equation)
(Option : BELDynaTM - Adsorption
rate analysis software)
Physical W600xD300xH600 mm, 60 kg
Utility Gas: He: pres. 0.2 bar (Gauge) (joint: 1/8” Swagelok)
Air for pneumatic valve:
pres. 4~5 bar (Gauge)
(joint: quick connect for 1/4” plastic (teflon) tube)
Power :AC100
~ 120, 200 ~ 240V/ 500W