K13900 Cleveland Open-Cup Flash Tester
Determines flash and fire points by the Cleveland Open-Cup method. Consists of test flame applicator, brass test cup, thermometer support, heating plate and electric heater. Applicator is precisely aligned per specifications and pivots for test flame application at specified temperature intervals. Hinged thermometer support raises to facilitate placement and removal of test cup. Adjust flame size using built-in needle valve and comparison bead.
Equipped with a 1000W nickel-chromium heater with stepless variable heat control for accurate repeat setting of temperature rate of rise per specifications.
Heater unit is enclosed in a stainless steel housing with cooling vents. Test flame applicator and thermometer support are constructed of machined nickel plated brass.
For flash and fire points of all petroleum products, except fuel oils and those having an open cup flash below 79°C (175°F).
Features and Benefits
• Conforms to ASTM D92 and related specifications
• For flash points above 79°C (175°F)
Conforms to: ASTM D92, D6074, D6158; AASHTO T48; ANS Z-11.6; IP 36; ISO 2592; DIN 51376; FTM 791-1103, FTM 141-4294
115V 50/60Hz, Single Phase, 6.5A
220-240V 50/60Hz, Single Phase, 3.4A
Brass Test Cup
Net Weight: 8.5 lbs (3.9kg)
Shipping Weight: 12 lbs (5.4kg)
Dimensions: 1.5 Cu. ft.
Number Product Description Electrical Requirements
K13900 Electrically Heated Model 115V 50/60Hz
K13990 Electrically Heated Model 220-240V 50/60Hz
Number Product Description Temperature Range
250-000-11F ASTM 11F Thermometer 20 to 760°F
250-000-11C ASTM 11C Thermometer -6 to +400°C
K14000 Cleveland Open Flash Cup
Precision machined brass with heat resistant handle