Home.Suppliers.Application.Articles.Products.Rentals.Contact Us.
Koehler      
Viscosity.

Penetration.

Flash Point.

General Testing.

Distillation.

Fuels.

Lubricating Oils.

Tribology.

Lubricating Greases.

Bitumens & Waxes.

K87700/K87790 Automatic Tag Closed Cup Flash Point  Tester
Automatic Tag Closed Cup Flash Point Tester
The automated Tag Closed Cup flash point tester ensures the accuracy and precision required according to the ASTM D56 and related test methods. The test sample is heated at a prescribed rate of temperature increase throughout the standard temperature test range to 100°C. The flash point tests are simply conducted by mounting the flash cup filled with sample into the test position and selecting a pre-programmed test method or the search mode to determine an approximate flash point. The automation routines provide accurate test results. Ignition by gas flame or electrical ignitor is included, along with safety cut-off devices. The measurement range can be extended to –-30°C by any appropriate external chiller. Supervision software is included.

Test Method
For flash point determinations of liquids with a viscosity of below 5.5 centistokes (cSt) at 104°F (40°C) or below 9.5cSt at 77°F (25°C), and a flash point below 200°F (93°C) except cut-back asphalts, those liquids which tend to form a surface film under test conditions and materials which contain suspended solids.

Features and Benefits

• Conforms to ASTM D56 and related specifications

• Simple automation routine for easy operation


Specifications
Conforms to the specifications of:
ASTM D56; IP 304

Electrical Requirements

115/230V 60/50Hz, Single Phase

Dimensions lxwxh,in.(cm)
21 x10.5x19.75 (53.5x26x50)
Net Weight:
44 lbs (20kg)


 Ordering Information
 Catalog
Number
Product Description Electrical Requirements
 K87700 Automatic Tag Closed Cup Flash Point Tester 115V 60Hz
 K87790 Automatic Tag Closed Cup Flash Point Tester 230V 50Hz
 

Copyright ® 2007 Particle Test Pty Ltd